Are 10mm And 3/8 The Same?

What’s the same as a 10 mm?

10mm is a standard socket.

But if you mean a set measured in inches, there is no exact equivalent.

It is between 3/8 and 7/16..

What size is 10mm in inches?

MMApproximate Size In InchesExact Size In Inches8mm5/16 Inch0.31496 Inches9mmJust short of 3/8 Inch0.35433 Inches10mmLittle over 3/8 Inch0.39370 Inches11mm7/16 Inch0.43307 Inches21 more rows

How big is an 8mm ring?

How wide is an 8mm ring? An 8mm ring is as about the width of four nickles stacked together. A standard U.S uses nickle measures 1/16 of an inch, which is almost 2mm wide. Four nickles, or 8mm, would measure 1/4 inch.

How do I know what size nut to buy?

Place the end of a measuring tape on one of the flat sides of the nut’s outer perimeter. Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement.

What is 3/8 as a mixed number?

Mixed Number to FractionMixed Numbers to Improper FractionMixed NumbersImproper Fraction3 3/415/43 3/827/83 8/935/912 more rows

What is 3/8 as a percentage?

37.5%Common Fractions with Decimal and Percent EquivalentsFractionDecimalPercent1/80.12512.5%3/80.37537.5%5/80.62562.5%7/80.87587.5%21 more rows•Feb 21, 2017

What size is a 10mm nut?

Size ChartBolt sizeSizeTolerance9mm9.033/8″9.55M610mm10.04M711mm11.0437 more rows

Which is smaller 8mm or 10mm?

The higher the gauge number the smaller the wire is….CONVERSION CHART:GaugeMillimeterInch0g8mm5/16″00g9mm to 10mm3/8″11mm7/16″13mm1/2″26 more rows

Are 10mm and 3/8 the same?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch.

What is 3/8 as a whole number?

0.3753 / 8 = 0.375 3/8 rounded up to the nearest whole number is 1 and 3/8 rounded down to the nearest whole number is 0.

How many mm is 16 gauge?

Wire Gauge to Inches and Millimeters ConversionGaugeInchesMillimeters160.0521.29170.0451.14180.041.02190.0360.9125 more rows

What is 3 and 3/8 as a decimal?

Fraction to decimal conversion tableFractionDecimal2/80.253/80.3754/80.55/80.62551 more rows

What does 3/8 convert to in MM?

Conversion Table inches to mmDimensions — Inches to Metric0.375”3/8”9.53 mm0.438”7/16”11.13 mm0.500”1/2”12.70 mm0.563”9/16”14.30 mm21 more rows

What is 10mm in English?

Millimeters to inches conversion tableMillimeters (mm)Inches (“) (decimal)Inches (“) (fraction)8 mm0.3150 ″5/16 ″9 mm0.3543 ″23/64 ″10 mm0.3937 ″25/64 ″20 mm0.7874 ″25/32 ″17 more rows

What is equal to a 10mm socket?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm39 more rows

What gauge is 9.5 mm?

Wire Gauge Reference Table (AWG)AWG/SWG/BWG/MMBare Dia. (Inch)AWG9 AWG0.11440092.8 MM0.110236912 BWG0.109000109.5 AWG0.1079799.564 more rows

What size is a bolt with a 10mm head?

Metric Shoulder Bolt DimensionsShoulder Diameter (A)Thread (C)Head Diameter (E)6mm5mm x 0.810mm8mm6mm x 1.013mm10mm8mm x 1.2516mm12mm10mm x 1.518mm3 more rows